ACCESSORIES AND ATTACHMENTS
Visit your Hardware Department or see the Power and
Hand Tools Catalog to purchase recommended
accessories for this power tool.
TOOLS NEEDED FOR ASSEMBLY
UNPACKING AND CHECKING CONTENTS
Separate all parts from packing materials. Check each part
with the illustration on the next page and the "Table of
Loose Parts" to make certain all items are accounted for,
before discarding any packing material.
TABLE OF LOOSE PARTS
Table saw assembly
Bolt, flat washer, toothed washer,
Oval washer, spring washer
Blade guard and splitter
Rear table extension
Rear table extension tube
Dust collect elbow
Parallel washer hardware
#2 Philips screwdriver
— 7 —
To avoid the risk of personal injury:
Do not use adjustable (wobble) type dadoes or carbide
tipped dado blades; maximum dado width is 1/2".
Do not use a dado with a diameter larger than 6".
Do not use molding head set with this saw.
Do not modify this power tool or use accessories not
recommended by Store.
If any part is missing or damaged, do not attempt to
assemble the table saw, plug in the power cord, or turn
the switch ON until the missing or damaged part is
obtained and is installed correctly.
Hex. head bolts
Square neck bolts
NOTE: To make assembly easier, keep contents of box
together. Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean dry cloth. This will
reduce friction when pushing the workpiece. To avoid
injury, the styrofoam block should be removed between
the motor and the table.