ACCESSORIES AND ATTACHMENTS
Visit your Hardware Department or see the Power
and Hand Tools Catalog to purchase recommended
accessories for this power tool.
TOOLS NEEDED FOR ASSEMBLY
13 mm Hex Wrench
4 mm Hex Wrench
5 mm Hex Wrench
UNPACKING AND CHECKING CONTENTS
Separate all parts from packing materials. Check each
part with the illustration on the next page and the "Table
of Loose Parts" to make certain all items are accounted
for, before discarding any packing material.
TABLE OF LOOSE PARTS
Table saw assembly
Blade guard and splitter ass'y
Dado table insert
Push stick storage
Blade guard hardware bag ass'y
#2 Phillips screwdriver
– 7 –
To avoid the risk of personal injury:
• Do not use a dado with a diameter larger than 8".
• Maximum dado width is 13/16". DO NOT USE
• Do not use molding head set with this saw.
• Do not modify this power tool or use accessories
not recommended by Store.
If any part is missing or damaged, do not attempt
to assemble the table saw, plug in the power cord,
or turn the switch ON until the missing or damaged
part is obtained and is installed correctly.
NOTE: To make assembly easier, keep contents of box
together. Apply a coat of automobile wax to the table.
Wipe all parts thoroughly with a clean dry cloth. This will
reduce friction when pushing the workpiece.