Updating System Software; Software Update Procedure - Bose SoundLink Air Owner's Manual

Whippet_OG.book Page 17 Wednesday, May 16, 2012 3:51 PM

Updating system software

Software updates sometimes become available to improve the performance of your
system. The following is the preferred method for installing software updates.
Note:
For another software update method, see "Alternate update method" on page 18.

Software update procedure

1. Make sure your SoundLink Air system is connected to your Wi-Fi
there is an Internet connection. The front panel Wi-Fi indicator (
blue.
2. On the remote, press and hold Mute for 10 seconds while watching the front panel
Wi-Fi indicator.
AUX
• If the Wi-Fi indicator double-blinks green twice, you can release the Mute button:
The system software is up to date and the system returns to the previous operating
mode.
• If the Wi-Fi indicator starts quickly blinking green, release the Mute button:
A software update is necessary and the software starts downloading. The Wi-Fi
indicator continues blinking until the download is finished. While the software
update is installed, the Wi-Fi indicator glows solid green for three seconds followed
by a double blink. This pattern repeats until the installation is finished. At the end of
the installation, the system emits a tone and automatically restarts. After restart,
the system will automatically connect to your Wi-Fi network again.
CAUTION: Do not remove power from the SoundLink Air system while updating the system
software.
Note:
If the Wi-Fi indicator starts blinking red, a system error has occurred. Contact Bose Customer
Service for assistance.
C M
ARE AND AINTENANCE
® network and that
) should be solid
English – 17