Operation; Power On/Off (Standby); Controlling The Volume; Listening To An Airplay Compatible Device - Bose SoundLink Air Owner's Manual

Whippet_OG.book Page 11 Wednesday, May 16, 2012 3:51 PM

Power on/off (standby)

To turn the system on, press the remote power button
your Wi-Fi network (solid blue Wi-Fi indicator), you can also turn it on by streaming
AirPlay audio.
Press the remote power button
If the system is connected to your Wi-Fi network when you turn it off, the Wi-Fi
connection is maintained (Wi-Fi indicator is still sold blue but dimmed).
Note:
After 30 minutes of no activity, the system automatically turns off (standby).

Controlling the volume

To increase or decrease the system volume:
• Use the volume up
of the speaker, or the volume controls on your AirPlay compatible device.
• Press the remote mute button
sound. When muted, the front panel mute icon glows white.
Note:
The front panel indicator for the selected source (
verify the command.

Listening to an AirPlay compatible device

After connecting to your wireless router, the SoundLink
to stream AirPlay audio at any time. If an AUX source is connected and playing when you
begin streaming audio from your AirPlay compatible device, that source stops and you
will hear the AirPlay audio stream.
To listen to streamed audio:
1. Start a music app on your AirPlay compatible device or computer. Make sure it is
connected to the same Wi-Fi network as the SoundLink Air system.
2. To make sure the initial volume is not too loud, move the volume slider in the music
app to within the lower third of the scale.
to turn the system off (put in standby).
and down buttons on the remote, on the right-hand side
to silence the system. Press it again to restore the
O
PERATION
. If the system is connected to
or AUX) blinks with every button press to
® Air digital music system is ready
English – 11