Moving The System After Wi-Fi Setup - Bose SoundLink Air Owner's Manual

Whippet_OG.book Page 10 Wednesday, May 16, 2012 3:51 PM
G S
ETTING TARTED
B. Select your Wi-Fi network - This field should display the name of your wire-
less network. If you have more than one, click the triangle (
network you want from the drop-down list.
If your network name does not appear in the list or it is hidden, select Other
from the drop-down list and manually set up your network
C. Enter your network password - If you are using a secured network, enter
your password.
D. Click Connect.
A progress screen is displayed while the system works on connecting. This
may take up to three minutes. You may cancel at any time during the process.
If it fails to make a connection, make sure your network name and password
are correct and try again.
5. Wait for the connection confirmation:
A confirmation dialog is displayed on your computer, the system emits a tone and
the front panel Wi-Fi indicator changes to solid blue.
Your system is now ready to stream audio from an AirPlay compatible device. See
"Listening to an AirPlay compatible device" on page 11.

Moving the system after Wi-Fi setup

After the initial setup, you can move the SoundLink Air system to any location within the
range of your Wi-Fi network. Remove the power cord from the AC outlet, move the
system and plug it in again. The Wi-Fi indicator will start blinking blue as the system
works on automatically connecting to your network again. When connected, the system
will emit a tone and the Wi-Fi indicator will be solid blue.
Note:
If you change anything in your Wi-Fi network, or move the system to a location where it is within
the range of a different Wi-Fi network, you will need to run the setup application again. When you move
it back to within range of your original network, the system will automatically connect without needing to
run the setup application again. The system remembers the last four Wi-Fi networks used.
10 – English
) and select the