Using The System; Connecting To Power - Bose SoundDock Owner's Manual

English TAB 2

Connecting to power

With the proper insert installed, you can now plug in the
system.
1. Insert the connector into the jack on the back of the
system.
2. Insert the small connector end of the power cable into the
jack on the power pack.
3. Plug the other end of this cord into a wall outlet.
1
TAB 3 TAB 4
3
Power
Power cable
2
pack
TAB 5 TAB 6
S
OUND

Using the system

®
Your SoundDock digital music system is ready to go as soon
as you plug it in. Simply set your iPod/iPhone to play what you
want and insert it into the dock on the front of the system.
• You should hear the music immediately. If you do not, refer
to "Troubleshooting" on page 6.
• The + and – buttons on either side of the dock (above) allow
you to adjust the system volume.
• Whenever your iPod/iPhone is docked in the system, it
recharges (until fully charged).
Note:
iPod/iPhone navigation controls are fully functional while your
iPod/iPhone is docked in the system.
TAB 7 TAB 8
®
D
OCK DIGITAL MUSIC SYSTEM
+ and –
volume
controls
3