Alternate Setup Method; Configuring Your Network Manually - Bose SoundLink Air Owner's Manual

Whippet_OG.book Page 15 Wednesday, May 16, 2012 3:51 PM

Alternate setup method

Using this method you can set up the SoundLink Air System by first joining its own built-
in wireless network and then connecting to your home wireless network.
1. Place the SoundLink Air system near your computer/mobile device.
2. Make sure there are no cables or power connected to the SoundLink Air system.
3. Connect the SoundLink Air system to power (refer to "Connecting the system to
power" on page 7) and wait 30 seconds.
4. Press and hold the Reset button on the bottom of the SoundLink Air System for at
least two seconds until the Wi-Fi indicator turns solid amber.
5. Wait for an audio tone (after approximately 30 seconds) before proceeding.
6. Using your computer/mobile device, turn on Wi-Fi and connect to the "Bose
SoundLink Air Network."
7. Open a browser and type: http://192.168.1.1.
8. Follow the onscreen instructions.

Configuring your network manually

To manually configure your network or change the settings:
1. Select Advanced Configuration from the File menu.
C M
ARE AND AINTENANCE
English – 15