Page 1
Bose SoundLink ® ® around-ear wireless headphones II Owner’s Guide │ Danish │ German │ Dutch │ Spanish │ Finnish │ French │ Italian │ Hungarian Norwegian │ Polish │ Swedish │ Thai │ Korean │ S. Chinese │ T. Chinese │ Japan │ Arabic...
Page 3
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the United States and in other countries. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Bose ®...
Contents Thank you ......................5 Unpacking ......................5 Headphone components ..................6 Charging the battery ....................7 Battery indicator ...................7 Selecting a language for voice prompts ............7 Turning voice prompts off/on ..............8 Pairing a mobile device ..................8 Pairing with NFC ....................9 Playing music .......................
® ® headphones II. These wireless stereo headphones combine the audio performance and comfort you expect from Bose with the freedom of wireless. Unpacking Check the carton for: headphones, carry case, USB charging cable, and back-up audio cable. Be sure to save all packing materials. They provide the safest means for any necessary shipping or transporting.
Introduction Headphone components Near Field Communication Back-up audio cable connector (NFC) touchpoint Power/Bluetooth button ® USB charging connector (three-position) Bluetooth and battery Headphone controls indicators Microphone 6 - English...
Operation Charging the battery Plug the small end of the USB cable into the micro-USB connector on the right earcup. Plug the other end into a USB wall charger or computer that is powered on. Allow up to three hours to fully charge the battery. A full charge will power the headphones for up to 15 hours.
On your mobile device, make sure the Bluetooth feature is on. (The Bluetooth menu is usually found in the Settings menu.) Select Bose AE2 SoundLink from the device list. You will hear, “Connected to <device name>” or you will see the Bluetooth indicator glow solid white.
Operation Pairing with NFC If your device supports Near Field Communication (NFC), you can easily pair it with the headphones. Turn the headphones power on. Tap the NFC touchpoint on your mobile device to the center of the right earcup. Your device may ask you to accept pairing. Note: Before tapping your mobile device, make sure your device is unlocked and the Bluetooth and NFC features are both on.
“Bluetooth device list cleared.” Delete Bose AE2 SoundLink from the Bluetooth list on your mobile device. All Bluetooth devices are cleared and the headphones are ready to pair. Headphone controls The headphone controls are located on the side of the right earcup.
Operation Headphone status indicators The battery and Bluetooth indicators are located on the side of the right earcup. ® Green: Medium to full charge Blue blinking: Ready to pair Amber: Low charge White blinking: Connecting Red blinking: Need to charge White solid: Connected Battery charge level Each time you power on the headphones, the voice prompt will announce the...
Then try pairing again. mobile device • Delete Bose AE2 SoundLink from the Bluetooth list on your mo- bile device. Then try pairing again. • Move the mobile device closer to the headphones and away from any interference or obstructions.
Do not allow moisture to get inside the earcups or the audio input connector. Do not use liquids or sprays. Replacement parts and accessories Replacement parts and accessories can be ordered through Bose Customer Service. See “Customer service” on page 14. English - 13...
Care and Maintenance Customer service For questions about your headphones, contact your local Bose dealer. • To contact Bose directly, visit: global.Bose.com • US only: owners.Bose.com/SoundLinkAE2 Limited Warranty Your Bose SoundLink around-ear wireless headphones II are covered by a limited ®...