Display Messages During A Disturbance; Dc Overvoltage - SMA WINDY BOY 5000A User Manual

SMA Solar Technology AG
Display message
4.3 Display Messages during a Disturbance
In the event of a disturbance, the inverter displays the status "Disturbance" and an error message.
Inform your installer.
Display message
E-today
Mode Disturbance
Disturbance
Vac-Bfr
4.4 DC Overvoltage
Display message
!PV-Overvoltage!
!DISCONNECT DC!
User Manual
Description
Energy generated on the current day
Status message "Turbine"
Current feed-in capacity
Voltage of the small wind turbine system
After a further 5 seconds or after tapping, the current
values of the reactive power Qac and of the
displacement power factor cos φ (PF) are displayed.
Total amount of energy fed in
Total number of operating hours in feed-in operation
Description
Energy generated on the current day
0Wh
Status message "Disturbance"
Operating state
Error message
Measured value at the time of the disturbance
Current measured value (only displayed if a
measured value is responsible for the disturbance)
Description
The DC input voltage is too high at the inverter.
Inform your installer immediately!
WB5A-6A-BA-BEN114530
Display
13