Overview; Printer Mechanism Adjustment Items - Epson Stylus CX3100 Service Manual

EPSON Stylus CX3100/3200

5.1 Overview

This Chapter describes the necessary adjustment items and adjustment procedures for
applicable Unit / Parts.

5.1.1 Printer Mechanism Adjustment Items

The adjustment items for this product are as indicated below. When performing any of
these adjustments, be sure to execute all the related items so that this product operates
normally.
Table 5-1. Mechanism Adjustment Items
1 2
Firmware
Head ID
Adjust contents
upload
input
Not Not
Head removal
applicable applicable
Not
Head replace
applicable
Main board
replacement
Not Not
CR unit replace/
removal
applicable applicable
Not Not
CR motor replace
applicable applicable
Not
Printer mechanism
replace
applicable
Not Not
Waste ink porous
pad replace
applicable applicable
Note 1: mark shows that adjustment work is necessary. The circled figures indicate the order
in which the adjustment work is to be carried out.
2: The following adjustment is not necessary for this product.
•
Head Slanting Adjustment
Adjustment
3 4 5
Bi-D USB-ID Protect
Ink filling
adjust input counter reset
Not Not
Not applicable
applicable applicable
Not
Not applicable
applicable
Not
Not applicable
applicable
Not Not
Not applicable
applicable applicable
Not Not
Not applicable
applicable applicable
Not
Not applicable
applicable
Not Not Not
applicable applicable applicable
This section shows details of each Adjustment Process according to Adjustment
Program.
Adjustment Information for each Printer Mechanism needs to be set for this product in
order to maintain reliable printing function and print quality for each printer
mechanism. Accordingly, once the Printer Mechanism, Main Board or Print Head has
been replaced, it is necessary to set and save the correct information of the mechanism
into the Main Board by using the Adjustment Program.
During execution of the Adjustment Program, be sure to turn off
C A U T I O N
the power to the printer when parts are to be removed and
installed.
6
Overview
Revision A
58