Checking Drive Belts - Hyundai Tiburon Owner's Manual

6
DO-IT-YOURSELF MAINTENANCE
22
G170A01A-AAT
Brake Pedal
0.12~0.31 in.
(3~8 mm)
With the engine off, press down on the brake
pedal several times to reduce the vacuum in the
brake booster.
Then, using your hand, press down slowly on
the brake pedal until you feel a change in
resistance. This is the brake pedal free-play.
The free-play should be within the limits speci-
fied in the illustration. If it is not, have it inspected
by your Hyundai dealer and adjusted or re-
paired if necessary.
gkflhma-6.p65 22
CHECKING BRAKE PEDAL
CLEARANCE
G180A01A-AAT
1.78 in. (45.1 mm)
You need a helper to check the brake pedal
HXGS508
clearance. With the engine running, have your
helper press down on the brake pedal several
times and then hold it down with a force of about
110 lbs (50 kg, 490 N). The brake pedal clear-
ance is the distance from the top surface of the
brake pedal to the asphalt sheeting under the
floor mat.
If the brake pedal clearance is not within the
limits specified in the illustration, have it in-
spected by your Hyundai dealer and adjusted
or repaired if necessary.

CHECKING DRIVE BELTS

G190A01A-AAT
2.0L
Power
steering
A/C
Water pump
comp.
pulley
Tension
pulley
Crankshaft pulley
G180A01L
2.7L
Power steering
Auto tensioner
Generator
Crankshaft pulley
9/8/04, 5:31 PM
Generator
G190A01GK
A/C
comp.
G190A02B