Hyundai Tiburon Owner's Manual page 83

1
FEATURES OF YOUR HYUNDAI
72
NOTE:
o The air intake control switch will change
to " " mode when the ignition switch
is turned "ON" with the MAX A/C mode
selected.
o When you change to another mode from
MAX A/C, the A/C and the air intake
control switch are set to the following
chart.
Air Intake
A/C
Control Switch
ON
or
ON or OFF *
ON or OFF *
ON
ON
* The A/C or the air intake control switch return
to its former setting.
gkflhma-1b.p65 72
HEATING CONTROLS
B690A02S-AAT
B690A01GK-A
*
For normal heating operation, set the air intake
control to the "Fresh" position and the air flow
control to "Floor".
For faster heating, the air intake control should
be in the "Recirculation" position.
If the windows fog up, move the air flow control
to the "Def" (defroster) position. (The A/C will
turn on automatically and "Fresh" mode will be
activated.)
For maximum heat, rotate the temperature
control to the farthest right position.
BI-LEVEL HEATING
B700A02E-AAT
B700A01GK-A
Your Hyundai is equipped with bi-level heating
controls. To use this feature:
o Set the air intake control to the fresh air (
position.
o Set the air flow control at the bi-level (
position.
o Adjust the fan speed control to the desired
speed.
o Set the temperature control between "Cool"
and "Warm".
9/8/04, 5:37 PM
)
)