Restore Bacnet Gw-3 - Notifier BACnet GW-3 Installation And Operation Manual

Restore BACnet GW-3

Step 3. Navigate to where you want to store the backup file, type a name for the file, and then
3.4 Restore BACnet GW-3
Follow these steps to restore a previously backed up BACnet GW-3.
Step 1. Log into the BACnet GW-3 (refer to
Step 2. Click Tools
Step 3. Navigate to where the backup file (.bnk) was saved, click on the file name, and then click
BACnet Gateway-3 Installation and Operation Manual - P/N: 53372:Rev: A 5/6/09
click Save.
Restore Gateway.
Open.
The gateway is restored, and reboots automatically.
BACnet GW-3 Configuration and Operation
"Log into the BACnet GW-3" on page 30).
39