System Architecture; 1: Single Panel Architecture; Figure 1.1 Bacnet Gw-3 Single Panel Diagram; 2: Nfn Network Architecture - Notifier BACnet GW-3 Installation And Operation Manual

Table of Contents

Advertisement

System Architecture

1.8 System Architecture
NOTE: The BACnet GW-3 client workstation is not intended as a primary annunciator and is ancillary
in nature.
These are connections options for the BACnet GW-3 architecture.
An Internet or Intranet IP network connection is used with both architectures.
1.8.1 Single Panel Architecture
Direct panel connection; a connection is made directly to a supported NOTIFIER® panel or
annunciator
Types", on page 47
1.8.2 NFN Network Architecture
NFN network connection; a NUP connection is made to an NCM or HS-NCM board on the NFN
network as the BACnet GW-3
BACnet Gateway-3 Installation and Operation Manual - P/N: 53372:Rev: A 5/6/09
(Figure 1.1 on page
11). Refer to
for supported panels and annunciators.

Figure 1.1 BACnet GW-3 Single Panel Diagram

(Figure 1.2 on page
NOTIFIER® BACnet Gateway-3 Features
Appendix B, "BACnet GW-3 Compatible Node
BACnet/IP Client with Workstation Front End
IP connection over
Ethernet
BACnet GW-3
NUP connection
FACP
12)
11

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Bacnet gateway-3

Table of Contents