Figure 3.2 Nup To Nup Connection - Notifier BACnet GW-3 Installation And Operation Manual

BACnet GW-3 Configuration and Operation
NUP to NUP Cable Connection
A NUP to NUP cable is used to connect between the gateway and the NFN network. Connect the
cable between to the BACnet GW-3 circuit board NUP "A" connector and an HS-NCM-W/SF/MF
board NUP "A" connector.
Connect to an HS-NCM-W/SF/MF
using NUP "A" only
36
NUP to NUP cable

Figure 3.2 NUP to NUP Connection

BACnet Gateway-3 Installation and Operation Manual - P/N: 53372:Rev: A 5/6/09
Connect the BACnet GW-3 to the NFN Network or FACP
NUP A (J6)
USE NUP A ONLY