Table 3.1 Bacnet Gw-3 To Fire System Connection Options - Notifier BACnet GW-3 Installation And Operation Manual

BACnet GW-3 Configuration and Operation
Find Your Fire System Connection Option
Once the BACnet GW-3 is connected to the IP network, connect it to either a fire alarm control
panel or an appropriate network control module. Refer to
Connection Options"
NOTE: Make only one of these connections.

Table 3.1 BACnet GW-3 to Fire System Connection Options

When Connecting...
...to a high speed NFN network consisting exclusively of
High Speed compatible panels
...to an NFN network
directly to a fire alarm control panel to be accessed
through the BACnet GW-3
34
Connect the BACnet GW-3 to the NFN Network or FACP
for details.
Refer to
Section 3.2.1, "Connecting BACnet GW-3 to a High
Speed NFN Network Control Module" on page 35
Section 3.2.2, "Connecting BACnet GW-3 to an NFN
Network Control Module" on page 37
Section 3.2.3, "Connecting BACnet GW-3 Directly to a
Fire Alarm Control Panel" on page 38
BACnet Gateway-3 Installation and Operation Manual - P/N: 53372:Rev: A 5/6/09
Table 3.1, "BACnet GW-3 to Fire System