5: Log Into The Bacnet Gw-3 For Configuration - Notifier BACnet GW-3 Installation And Operation Manual

BACnet GW-3 Configuration
Step 4. Record your current Internet Protocol (TCP/IP) property settings so you can restore them
Step 5. Click Use the following IP address, and then type 192.168.1.X into the IP address field.
NOTE: X can be any number between 0 and 255 except for 2 (since the BACnet GW-3 default IP
address is 192.168.1.2).
Step 6. Click OK, and then close all remaining open windows.
3.1.5 Log into the BACnet GW-3 for Configuration
NOTE: The BACNet Gateway Configuration Tool must run at a resolution of 1024 X 768 or
greater.
Step 1. Launch the BACNet Gateway Configuration Tool by clicking Start
Step 2. Click the Address field, and then click the default gateway IP address 192.168.1.2 in the
Step 3. Click File
BACnet Gateway-3 Installation and Operation Manual - P/N: 53372:Rev: A 5/6/09
later.
BACnet Gateway Config Tool from the Windows taskbar.
menu that drops down.
Login....
BACnet GW-3 Configuration and Operation
All Programs
27