Reset Button; Contact Information - GE Security Simon XT Quick Operation Manual

2. Replace all batteries being sure to follow the polarity
instructions (replace with four 1.5 V, Alkaline AAA batteries).
Avoid touching the touch screen face while you are replacing
the batteries.
3. Briefly disconnect the AC power (this will clear the battery
fault).
4. Reconnect AC power.
Note: If AC power is lost and batteries are not present or are
depleted, the touch screen will not power up until AC power is
restored (even if new batteries are installed).
Cleaning the touch screen
If necessary, use a soft cloth to clear smudges on the screen; do
not use glass cleaner on the screen.

Reset button

The Reset button is located on the bottom left side of the touch
screen mounting plate. To power cycle the touch screen, use a
toothpick to depress the recessed Reset button.
Figure 1: Reset button
Reset button

Contact information

For contact information see our Web site: www.gesecurity.com.
P/N 466-2384 • REV A • ISS 02MAR10
Opening slot
3 of 4