User Setup; Authority Levels - Honeywell 6280 Series User Manual

User Setup

User Setup
User Setup allows you to Add a User, Delete a User, and Edit a User. You may access User Setup from the
System Setup screen. Each user must be assigned a name with a corresponding 4-digit user code in order to gain
access to various features and functions. The TouchCenter can hold the identity for 10 Users in its memory. If
additional Users are needed, define the additional Users using the Console Emulation Mode.
Users for the system are programmed in a central user setup location that provides the specific questions for
authorization levels assigned to different users. You may want these users to be the same, but there are situations
in which you may want a user to have limited capabilities. These capabilities are defined by the Authority Level
assigned each user.

Authority Levels

Authority levels define the system functions a particular user can perform. Depending on the authority assigned to
you, there are certain system functions you may be prohibited from performing. The following information describes
the authority levels that can be assigned through the TouchCenter and provides the equivalent authority level name
found in your alarm system manuals. The authority levels that can be assigned are as follows:
Touch-
Center
Functions
Authority
Level
Master Can perform all security functions, add/delete users in assigned partition,
program scheduled events, and change partition master code
Normal Perform security functions (arm, disarm)
Guest Can arm the system in assigned partitions, but cannot disarm the system
unless the system was armed with this code.
Note: Do not assign this level if Quick Arm is enabled in your system.
No Used to restrict access from a partition.
Access
Equivalent System Name
Residential
Systems
Partition Master
Standard User
Guest
N/A
24
Commercial
Systems
Level 1 Master
Level 3 Operator A
Level 4 Operator B
N/A