This document provides Operating Instructions for your Keypad's voice features. Refer to your
security system User Guide for all other security system functions and operating procedures.
The ADEMCO 6150V/6160V Keypads feature a
voice message center that lets you record and
playback one message.
• The message can be up to 2.5-minutes long
• The message remains in the Keypad's
memory until a new message is recorded.
• The volume control of the message is
• Refer to the procedures below when using the
Message Center functions.
To record a message: Press [#] FUNCTION +  VOICE +  RECORD keys.
To end recording:
To play a message:
To adjust the volume: Press [#] FUNCTION +  VOICE +  VOLUME keys,
The red MESSAGE indicator will light, indicating record in progress.
Note: A message cannot be recorded during the Exit Delay period.
Press  RECORD key.
The red MESSAGE LED will flash indicating a message waiting to be
played. After the message is played once the MESSAGE LED will go
Press [#] FUNCTION +  VOICE +  PLAY keys.
The recorded message plays and the red MESSAGE LED turns off. The
recorded message will remain in memory until a new message is
then press the desired volume control key  ↑ (up) or  ↓ (down).
Adjusting message volume also adjusts status volume. Volume
cannot be adjusted while playing a message.
Each time you enter the command to adjust the volume, the word
"CHECK" will be heard to verify the current setting.
ADEMCO 6150V & 6160V
Voice Remote Keypad
K0022UGV1 12/01 Rev. C
(Continued on Other Side)