How To Access User Setup - Honeywell ADEMCO 6271V User Manual

User Code Setup (cont'd)
Guest Can arm the system in assigned
partitions, but cannot disarm the
system unless the system was
armed with this code.
Note: Do not assign this level if
Quick Arm is enabled in your
system.
No Access Used to restrict access from a
partition.

How to Access User Setup

Access User Setup as follows:
1. From the "Home" screen, press the SECURITY button. The "Arming" screen
is displayed.
SCREEN
34
Guest
N/A
ACTION
2. Press the MORE CHOICES button.
The "More Choices" screen is displayed.
3. Press the SETUP button on the "More
Choices" screen. The "Setup" screen is
displayed.
Level 4
Operator B
N/A