Maxview MXL020HD Operating Manual page 49

Problem
System crash (receiver
cannot be operated
anymore)
The remote control
does not work
Channel has received a
new frequency and is
not transmitted anymore
with the current data
Exit favourites list
Password
Cannot remember
personal password
Operating manual in
additional languages
Channel list editor
Default value
External USB storage
medium not recognised.
MXL020HD INSTRUCTIONS REVISION.indd 49
How to solve
Should it come to the improbable case of a system crash,
separate the receiver from the mains supply. Connect it
again after 10 seconds. With this, the problem can be solved
usually. Please note: a software crash is not a malfunction
and no guarantee will apply. For technical equipment (e.g.
also PC, radio network, etc.) a software crash can be solved
simply and quickly by following this procedure.
The batteries are exhausted. Replace the batteries.
The remote control is not directed properly.
Aim the remote control towards the front side of the receiver
and ensure that there is no obstacle between the remote
control and the receiver.
Delete the corresponding channel and carry out an
automatic scan.
Press the OK key and the 1 key
The default password is 0000.
Please contact the service hotline if you have forgotten your
personal password.
On our website this operating manual is available for
download in additional languages.
On our website a channel list editor is available for
download.
The default settings are restored if you keep the standby key
at the front side of your receiver pressed for more than 10
seconds. Caution! By doing this, your personal settings will
get lost.
Switch off the receiver with the mains switch. Insert the
USB storage medium again. Switch over the receiver to
normal mode again.
The common USB storage media known by us are
compatible with this receiver. For larger USB hard disks
you should use an external power pack following the
Page 49
15/05/2013 14:12