Software Updates - Maxview MXL020HD Operating Manual

Software Update (requires password input)
Upgrade by USB: Software update via USB interface.
The quickest and safest method is a software update via the USB interface. Should you wish
to do a software update, the method via the USB interface is preferable.
> S/W Upgrade by OTA (via satellite): The required data are preset. The procedure
will be initiated if you confirm the "Start" box by pressing the OK key.
The software update via satellite has nothing to do with the storage of new TV channels. It
is rather meant to update the system software of the receiver.
Normally, the software update is not required for a trouble-free operation of the receiver.
You must direct your satellite system towards the ASTRA1 19.2° East satellite to be able to
update the software.
Updating the software may take up to an hour.
After the update it is recommended to load the default settings. Please note that by doing
this, the channel list you created will be deleted.
Page 33
MXL020HD INSTRUCTIONS REVISION.indd 33 15/05/2013 14:12