Connection With Phono; Connection With Infra Eye Sensor - Maxview MXL020HD Operating Manual

Connection with Phono Cable
Connect the phono connectors of the audio cable to the AUDIO R and AUDIO L sockets of
the receiver if you want to connect a stereo system.
CAUTION!
Strictly follow the instructions for connecting the audio cable given in the operating manual
of your stereo system.
The phono cable is not included in this pack.
Connection with IR Eye
If you want the receiver to be hidden from view, for example in a cupboard, connect the
IR extension cable. You must ensure that there is a clear line of sight between your remote
control and the IR extension sensor.
Connection of an audio-digital receiver
If you want to use 5-channel audio transmission (Dolby digital sound/AC3), you must
connect your audio-digital receiver to the coaxial output of the receiver.
CAUTION!
Please follow strictly the information regarding connection in the operating manual of your
audio-digital receiver.
Your TV set need not be switched on for radio reception.
Connection of the coaxial digital output Insert the coaxial cable in the "SPDIF" socket of the
receiver. Connect the coaxial cable to the audio-digital receiver.
Page 11
MXL020HD INSTRUCTIONS REVISION.indd 11 15/05/2013 14:12