Maxview MXL020HD Operating Manual page 39

Switch between TV and SAT
With the TV/SAT key you can switch between TV and satellite functions. (This function has
to be provided by your TV set). Press the TV/SAT key until you have set the desired function.
CH- / CH+
Scrolling channels up and down
VOL+ / VOL-
Increase / decrease volume
MENU
Invoking a menu
RECALL
By pressing the "recall" key, you will change over to the previously selected channel.
P+ / P-
Normal mode: without function. With active channel list: switches between the channel lists.
TEXT
Teletext is an information system displaying Teletext on your TV set. For Teletext
reception, the selected channel must support this function. The TXT symbol appears when
channels are changed. Comparing our receiver to others you will notice that our Teletext is
extremely fast.
> Press the "TEXT" key to start Teletext.
> For switching off Teletext, press the "EXIT" or "TEXT" key.
EXIT
For exiting menus and/or applications.
OK
Normal mode: Invoking the channel list. Menu / applications: Confirmation

Normal mode: Volume adjustment. With active channel list: Jumping 10 channels up or
down. In a menu: Cursor function

Normal mode: Switching channels one by one. With active channel list: Switching channels
one by one. In a menu: Cursor function
FAV
> Press the FAV key. The screen shows the existing favourites lists.
> Select one and confirm with the OK key.
Page 39
MXL020HD INSTRUCTIONS REVISION.indd 39 15/05/2013 14:12