Editing Of Recorded Programmes - Maxview MXL020HD Operating Manual

Editing of recorded programmes (optional)
Press the INFO key during the reproduction of a recorded programme. A bar appears as
shown in the following figure. The bar provides specific information on the current
reproduction. After approx. 5 seconds, the bar will disappear if the receiver does not
receive any command.
By pressing the green function key of your remote control, you can bookmark the current
point of the reproduction. The bookmarks are indicated by red triangles in the progress
bar. Further bookmarks can be set wherever you wish. E.g., you can mark an unwanted
part of the recorded programme at the beginning and end and skip it by pressing the blue
function key. The bookmarks set remain stored for this programme.
Page 42
MXL020HD INSTRUCTIONS REVISION.indd 42 15/05/2013 14:12