Heater Elements Support Assembly; Thermal Resistor - Midea WQP6-3206B Technical Service Manual

Screws
3. Remove all nuts for fixing heater elements assembly. Then take out two gaskets of heater elements
assembly.
Nuts
4. Reverse the above procedure to install. And check out all connectors connects well.

Heater elements support assembly

Removal and replacement
1. Take out sump assembly. (see sump assembly
removal and installation)
2. Remove heater elements assembly. (see heater
elements assembly removal and replacement)
3. Take out gasket of heater elements support assembly.
Gasket
4. Reverse the above procedure to install. And check out all connectors connects well.

Thermal resistor

Removal and replacement
1. Take out sump assembly. (see sump assembly
removal and installation)
2. Turn the sump assembly, and remove all screws for
fixing thermal resistor.
Screws
3. Reverse the above procedure to install. And check out all connectors connects well.
Gaskets