Anchor 10’ Assembly Instructions

All purpose canopy

Assembly Instructions

ALL PURPOSE CANOPY

10' through 20' Wide Systems

Please read all assembly / installation instructions before the installation or removal of this product.

PHONE: 812-867-2421

SALES OFFICES:

FAX: 812-867-0547

PRODUCTION FACILITIES:

1100 BURCH DRIVE

1-800-544-4445

EVANSVILLE, IN

PO BOX 3477

EMAIL: tents@anchorinc.com

EVANSVILLE, IN 47733 USA

www.anchorinc.com

Quality, Craftsmanship and Service since 1892

EC3780

APC-0109

Table of Contents

Do you have a question about the 10’ and is the answer not in the manual?

Page 1: Assembly Instructions
Assembly Instructions ALL PURPOSE CANOPY 10’ through 20’ Wide Systems Please read all assembly / installation instructions before the installation or removal of this product. PHONE: 812-867-2421 SALES OFFICES: FAX: 812-867-0547 PRODUCTION FACILITIES: 1100 BURCH DRIVE 1-800-544-4445 EVANSVILLE, IN PO BOX 3477 EMAIL: tents@anchorinc.com EVANSVILLE, IN 47733 USA www.anchorinc.com...
Page 2 FOR THE STAKING PATTERN AND CONFIGURATION. SEE CHART ABOVE FOR STIFF, VERY STIFF AND HARD (ASPHALT) SOIL STAKING LAYOUTS. THIS REPRESENTS 1 OF 6 SOIL CONDITIONS REFERENCED IN THE IFAI GUIDE: “PULLOUT CAPACITY OF TENT STAKES”. YOUR SOIL CONDITION MAY DIFFER. THEREFORE, DIFFERENT STAKING REQUIREMENTS WILL RESULT. ANCHOR INDUSTRIES RECOMMENDS ERECTING TENTS ONLY IN THE ABOVE-MENTIONED SOIL CONDITIONS.
Page 3 LAYOUT AT SITE Stake 20’ x 20’ canopy used as example. Spread drop cloths and unroll canopy at exact position of desired ﬁ nished assembly. Any sharp ob- jects which must remain on site under the canopy should be padded and taped.
Page 4 Regardless of the number of stakes we suggest, we make no representation or warranty as to whether this specific number of stakes will meet the local tent code. Anchor does not, nor can it make any suggestions, representation, or warranties about the adequate staking required at each specific instal- lation site.

20’10’ x 10’12’ x 12’20’ x 30’