Disarming An Armed System; Alarm Memory Display - Paradox Digiplex DGP2-640 User Manual

6.2 Disarming an Armed System

You will only be able to disarm the area to which your user access
code is assigned. User access codes with the Arm Only option will
not be able to disarm the system.
How do I disarm the system?
1. Enter your [
2. Press the [
press the number key representing the area you want to disarm
or press the [0] key for all assigned areas.
You can also use a One-Touch key (see Section 5.6 on page
12) or a keyswitch (see Section 5.7 on page 13) to disarm the
area(s).
Disarming with a One-Touch key is only possible if the system
has been Stay or Instant armed.
How do I disarm a system in alarm?
1. Enter your [
2. Call your monitoring station quickly to advise them of the alarm.
In case of a burglar alarm, leave the premises and call your
monitoring station from a safe place.

6.3 Alarm Memory Display

Your system will record all of the alarms which occurred during the
last armed period. If an alarm was triggered in any area assigned to
your keypad, the Memory
].
ACCESS CODE
] key. If you have access to more than one area,
].
ACCESS CODE
icon will illuminate.
640 Icon LCD Keypad 17n