Continuous Continental Navigation - Navman iCN 510 User Manual

iCN 510 | User Manual

19. Continuous Continental Navigation

You can seamlessly navigate between installed maps without the need for installing all maps en route. This is achieved
by using a Basemap. A Basemap is a map of a large area, such as West Europe or the United States, containing main
roads that connect cities and towns. You can select a road or POI on the Basemap as your start point or destination.
Basemaps:
• contain roads and ferry connections of high national and international importance
• use less memory than would be necessary to install all equivalent detailed maps
• do not include smaller roads and have a reduced level of geographical detail.
You can add and remove basemaps using the Basemap Installer.
Note: Navigating in Australia or New Zealand does not require a Basemap.
Install Basemap
1. Connect the iCN to your computer.
• Connect the iCN to mains power supply using the adapter provided.
• Connect the USB cable to the iCN and to your computer USB port.
• Turn on the iCN by pressing the Power button. The iCN
connected.
2. Open Smart Desktop if it is not already open:  Desktop if it is not already open:

3. On the Map menu, click Basemaps. The Navman Basemap Utility window will open.
4. Click the appropriate Add button to install the Basemap to the iCN, memory card or memory card reader.
Activate Basemap
1. On your iCN, from the Main Menu, tap the Settings option.
2. From the Settings screen, tap Maps.
3. Complete one of the following:
• To activate a Basemap on the iCN, from the Maps screen, tap Internal Maps. The Settings - Maps (Internal)
screen will display.
• To activate a Basemap on the memory card, from the Maps screen, tap Memory Card Maps option. The
Settings - Maps (Memory Card screen will display.
Settings - Maps (Memory Card) Settings - Maps (Memory Card)
5. Select the Basemap you require.
6. Press ESC repeatedly until the Map screen displays.
• Tap Yes to accept the Warning dialogue box.
Power Power button. The iCN USB Connection screen will display when you are
Start > Programs > Navman > Smart Desktop
Navman Basemap Utility Navman Basemap Utility window will open.
34
.
 Desktop
