Route Demonstrator - Navman iCN 510 User Manual

13. Route Demonstrator

The Route Demonstrator allows you to:
• Preview a route, or
• Plan and view a route without a GPS fi x, such as when you are inside a building.
Step 1. Activate Route Demonstrator
1. From the Main Menu, tap the Settings option.
2. From the Settings screen, tap Routes. The Routing screen will display.
3. Tap Page twice.
4. Select the Demonstrate Route check box.
5. Tap ESC repeatedly until the Map screen displays.
• Tap Yes to accept the Warning dialogue box.
Step 2. Select Departure Point
If you have a GPS fi x, you do not need to select a departure point unless the demonstrated route is to start
elsewhere.
1. From the Main Menu, tap the Map option. The Map screen will display.
2. Tap the Map screen and place the intersection of the cross-hair over a departure point using the 4-way toggle.
3. Tap the intersection of the cross-hair, or press the 4-way toggle button to display the Pop-up menu.
4. Select Set as Start Location.
Step 3. Select Destination Point
1. Tap the Map screen and place the intersection of the cross-hair over your destination point using the 4-way
toggle.
2. Tap the intersection of the cross-hair, or press the 4-way toggle button to display the Pop-up menu.
3. Select Navigate To. The 3D Map screen will display and the Route Simulator starts your route.
• If you have selected the Repeat check box on the
stop it.
To Disable Route Demonstrator
1. Press Menu to return to the Main Menu screen
2. Tap the Route Information option, then the Cancel Route option. You will be returned to the Main Menu
screen.
Repeat Repeat check box on the Routing screen, the Route Demonstrator will repeat until you
23
iCN 510 | User Manual