Language Settings; Display Settings - Navman iCN 510 User Manual

14. To enable GPS datalogging, select Track Recording. The Data Logging Enabled screen will display.
Note: A memory card is required for datalogging.
• Tap the Name of log fi le box. The Enter Text screen will display.
• Press and hold the ESC button to clear the text box if required.
• Enter a name for the log fi le.
• Tap Enter. The Data Logging Enabled screen will display. Data Logging Enabled Data Logging Enabled screen will display.
• Tap Yes. The Routing screen will display.
15. Tap ESC repeatedly until the Map screen displays.
• If you have made changes to the settings, tap Yes to accept the Warning dialogue box.

Language Settings

1. From the Main Menu, tap Settings.
2. From the Settings screen, tap Language. The Settings - Language
screen will display.
3. To change the voice scheme used for voice guidance during
navigation, select your preferred voice scheme from the Language
box by tapping the left or right arrows.
4. To enable voice guidance during navigation, select the Enable check
box.
5. Tap ESC repeatedly until the Map screen displays.
• If you have made changes to the settings, tap Yes to accept the
Warning dialogue box.

Display Settings

1. From the Main Menu, tap Settings.
2. From the Settings screen, tap Maps.
3. From the Settings - Maps screen, tap Display. The Settings - Display
screen will display.
4. To enable auto-zoom when navigating to your destination, select the
Auto Zoom check box. If selected, the Map and 3D Map* screen
will automatically zoom in or out depending on your speed to allow
optimal view of your route.
5. To enable access to the Next Turn screen, select the Display Next
Turn Screen check box.
6. To enable access to the Next 4 Turns screen, select the Display Next
4 Turns Screen check box.
7. To change the colour scheme, select your preferred scheme from the Map Colour Scheme box by tapping the
left or right arrows.
8. To improve screen contrast in light or dark conditions, select either Day or
9. To display a topographical map on the Map and 3D Map screens, select the Topographic Display check box.
10. Tap Page.
11. To display grid lines on the Map and 3D Map screens, select the Display Map Grid check box.
Data Logging Enabled Data Logging Enabled screen will display.
Enter Text Enter Text screen will display.
27
Day Day or Night.
Topographic Display check box.
Topographic Display
iCN 510 | User Manual