Recording Mode; Continuous Recording; Emergency" Recording; Manual Recording - Navman MiVue 358 User Manual

Hide thumbs Also See for MiVue 358:
Table of Contents

Advertisement

Use the ▲ and ▼ keys to adjust the value and press the OK key.
3.
4.
Repeat Step 3 until all fields have been changed.

Recording mode

Continuous recording

When you connect the car charger to the cigarette lighter in the car, the recorder will
start continuous recording automatically. The recording may be divided into several video
clips; recording will not stop between video clips.
The recorder automatically stops and saves the recording when the vehicle engine is
turned off. If you want to stop recording manually, press the ▼ key.
Note: If continuous recording is ongoing and when the card has run out of memory, new video clips
will replace the old ones.

"Emergency" recording

By default, if an event happens, such as sudden impact, high-speed driving, an overturn or
an accidental crash, the G sensor will prompt the recorder to start an "Emergency"
recording.
The "Emergency" recording means to record 1 file instead of several video clips.
To manually start an "Emergency" recording while normal recording, press the OK key.
Note: If you want to disable the automatic "Emergency" recording, you can change the setting in
"G-Sensor Sensitivity" from the Settings menu. See Page 12 for information.

Manual recording

You can manually start the recording at any time by pressing the OK key. To stop
recording, press the ▼ key.
10

Advertisement

Table of Contents
loading

Table of Contents