Navman iCN 510 User Manual page 35

Remove Basemap
1. Connect the iCN to your computer.
• Connect the iCN to mains power supply using the adapter provided.
• Connect the USB cable to the iCN and to your computer USB port.
• Turn on the iCN by pressing the Power button. The iCN
connected.
2. Open Smart Desktop if it is not already open:  Desktop if it is not already open:

3. On the Map menu, click Basemaps. The Navman Basemap Utility window will open.
4. Select the Basemap to remove.
5. Click the appropriate Remove button to remove the Basemap from your iCN, memory card or memory card
reader.
Power button. The iCN USB Connection screen will display when you are
Power
Start > Programs > Navman > Smart Desktop
Navman Basemap Utility window will open.
Navman Basemap Utility
35
iCN 510 | User Manual
 Desktop .
