Power Status; Volume Settings - Navman iCN 510 User Manual

6. To adjust screen brightness, move the Brightness slider towards Low or High.
7. Tap ESC repeatedly until the Map screen displays.
• If you have made changes to the settings, tap Yes to accept the Warning dialogue box.

Power Status

1. From the Main Menu, tap Settings.
2. From the Settings screen, tap More Settings.
3. From the General screen, tap neral neral screen, tap
4. From the Hardware screen, tap Power Status. The Power Status screen will display the external and battery
power levels.
5. Tap ESC repeatedly until the Map screen displays.

Volume Settings

1. From the Main Menu, tap Settings.
2. From the Settings screen, tap More Settings.
3. From the General screen, tap neral neral screen, tap
4. From the Hardware screen, tap Volume. The Volume screen will display.
5. Move the Volume Level slider right to increase volume; Move the Volume Level slider left to decrease volume.
• Tap Test to test the volume.
7. Tap ESC repeatedly until the Map screen displays.
• If you have made changes to the settings, tap Yes to accept the Warning dialogue box.
Start Up and Tutorial Settings
1. From the Main Menu, tap Settings.
2. From the Settings screen, tap More Settings.
3. From the General screen, tap neral neral screen, tap
4. To display the Tutorial on startup, select the Tutorial Tutorial on startup, select the
box.
5. To display the Language Selection screen on startup, select the
Language Selection Screen check box.
6. To display the Tutorial, select the Show Tutorial option and press OK.
• The Tutorial T Tutorial utorial utorial will display. Tap will display. Tap
7. Tap ESC repeatedly until the Map screen displays.
• If you have made changes to the settings, tap Yes to accept the
Warning dialogue box.
Hardware.
Hardware.
Startup. The Startup screen will display.
Tutorial Screen check
Page to move through the screens.
31
iCN 510 | User Manual