Permobil C500 Owner's Manual page 37

Permobil C500 Owner´s Manual
Fault
Motor temperature
Control system temperature
Timer
Emergency stop
The control system can detect a large number of
faults. When the system has detected a fault that is
not serious enough to cause a stoppage, this symbol
is displayed.
This symbol is displayed when the control system
has intentionally rediced the power supply to the
motors to protect them against overheating.
This symbol is displayed when the control system
has intentionally reduced its own power supply to
protect itself against overheating.
This symbol is displayed when the control system
switches between different stages. For example, it
may be displayed when you enter programming
mode. The symbol is animated so that you can see
the sand running through the hourglass.
If the control system has been programmed for
locked operation or automatic adjustment of the
seat, an emergency stop key is normally connected
via the jack contact for an external profile key. If the
emergency stop key is used or disconnected, this
symbol flashes.
37
Design and function