Redialing When The Line Is Busy; Manual Redialing; Automatic Redialing - Canon FAX-TR177 User Manual

Redialing when the line is busy

Manual redialing _______________________________

Press [Redial/Pause] to dial the last number you dialed with the numeric buttons. (This starts
redialing regardless of whether automatic redialing is enabled.)
■ Canceling manual redialing
To cancel manual redialing, press [Stop]. See Removing a jammed document from the machine,
p. 8-1.

Automatic redialing ____________________________

■ What is automatic redialing?
When you are sending a document and the receiving party's line is busy, the fax waits the
specified time and then dials the same number again. You can set the fax to redial several times
if previous attempts fail because of a busy signal.
■ Canceling automatic redialing
1 Press [Stop].
If you want to cancel a memory-sending transmission while the fax is waiting to redial, you will
have to delete the document from memory (see p. 5-10).
■ Setting the options for automatic redialing
You can set the following options for automatic redialing:
• Whether or not the fax redials automatically.
• The number of times the fax attempts to redial.
• The time interval between redialing attempts.
1 Press [Function], then press [Start/Copy].
2 Use [ ] or [ ] to select <TX SETTINGS>, then press [Start/Copy].
3 Use [ ] or [ ] to select <AUTO REDIAL>, then press [Start/Copy].
• To disable automatic redialing, use [
to return to standby mode.
• To enable automatic redialing, use [
4 Press [Start/Copy] twice.
2TIMES
] or [ ] to select <OFF>, then press [Start/Copy]. Press [Stop]
] or [ ] to select <ON> and continue with the steps below.
ON
5
5-5