Sequential Broadcasting; Sending A Document To More Than One Location - Canon FAX-TR177 User Manual

Sequential broadcasting

Sending a document to more than
one location ____________________________________
Sequential broadcasting sends one document to more than one location.
You can send to a total of 35 locations as follows:
• One-touch speed dialing
• Coded speed dialing
You can enter the one-touch speed dialing and coded speed dialing locations in any order. You
simply press the one-touch speed dialing button, or press [Coded Dial] followed by the two-digit
code.
You must press each button within 6 seconds of the preceding one. The fax begins the operation
approximately 6 seconds after you press the last button.
1 Load the document face down into the document feeder (see p. 1-9).
2 Dial the receiving party's fax numbers as you need, then press [Start/Copy].
• The fax reads the document into memory and begins sending.
• To cancel a transmission, press [Stop] during dialing or transmission. All transmissions in the
sequence are canceled.
= 5 locations
= 30 locations
5
5-9