Real Time Transmission
When you are sending a fax, the MFC will scan the documents into
the memory before sending. Then, as soon as the phone line is free,
the MFC will start dialling and sending.
If the memory becomes full, the MFC will send the document in real
time (even if Real Time TX is set to Off ).
Sometimes, you may want to send an important document
immediately, without waiting for memory transmission. You can set
Real Time TX to On for all documents or for the next fax only.
If you want to fax multiple pages, use ADF.
1
If it is not illuminated in green, press
document face up in the ADF, or face down on the scanner
glass.
2
Menu
Press
3
To change the default setting,
press
Off ).
Set
Press
.
Go to Step 5.
—OR—
For the next fax transmission only, press
Next Fax Only .
Set
Press
.
4
Press
Fax:Off ).
Set
Press
.
6 - 11 SETUP SEND
2
2
5
,
,
,
.
or
to select On (or
or
to select Next Fax:On (or Next
Fax
(
). Place the
22.Setup Send
5.Real Time TX
▲
Next Fax Only
▼
On
▲▼
Select
& Set
or
to select