Brother MFC-8440 User Manual page 161

ERROR MESSAGES
ERROR CAUSE
MESSAGE
When you see this error, the paper in the paper
Check Paper
tray does not match the paper size you set in
Size
Menu, 1, 3.
The scanner lock is locked.
Check Scan
Lock
Poor phone line quality caused
Comm.Error
communication error.
You tried to poll a fax machine that is not in
Connection
Polled Waiting mode.
Fail
The temperature of the drum unit or toner
Cooling Down
cartridge is too hot. The MFC will pause its
Wait for a
current print job and go in
while
to cooling down mode. During the cooling
down mode, you will hear the cooling fan
running while the display on the MFC shows
Cooling Down, and Wait for a while.
The front cover was not completely closed.
Cover Open
Pls Close
Cover
The other party or other party's fax machine
Disconnected
terminated the call.
The paper adjustment lever for duplex
DX Lever
printing is not correctly set for the paper size.
Error
The face-up output tray is open.
Face Up Open
The fuser cover is open.
Fuser Open
MFC has a mechanical problem.
Machine Error
XX
You tried to make duplex printing with duplex
No DX Tray
cover open.
The number you dialled does not answer or is
No
busy.
Response/Busy
12 - 2 TROUBLESHOOTING AND ROUTINE MAINTENANCE
ACTION
Load the appropriate size paper or
change the default setting.
(See Setting the Mode Timer on
page 4-6).
Release the scanner lock lever, and
then press Stop/Exit.
Try the call again. If problem
continues, call Telephone Company
to check your phone line.
Verify the other party's polling setup.
You must wait 20 minutes for it to
cool.
Close the front cover for the drum
unit.
Try to transmit or receive again.
Set the duplex lever to the correct
position. (See To use Automatic
Duplexing for fax, copy and print
operations (For MFC-8840D) on
page 2-11.)
Please close the face-up output tray.
Please close the jam clear cover.
(See Paper jams on page 12-6.)
Call Brother or your dealer for
service.
Install the duplex tray correctly.
(See Paper is jammed in the duplex
tray (For MFC-8840D) on page
12-10.)
Verify the number and try again.