Brother MFC-8440 User Manual page 162

ERROR MESSAGES
ERROR CAUSE
MESSAGE
You tried to access a One-Touch or
Not
Speed-Dial number that is not programmed.
Registered
You can't store data in the memory.
Out of Memory
The paper is jammed in the MFC.
Paper Jam
TROUBLESHOOTING AND ROUTINE MAINTENANCE 12 - 3
ACTION
Set up the One-Touch or Speed-Dial
number. (See Storing One-Touch
Dial numbers on page 7-1 and
Storing Speed-Dial numbers on
page 7-3.)
(Fax sending in process)
Press Stop/Exit and wait until the
other operations in progress finish
and then try again.
—OR—
Clear the data in the memory.
(See Out of Memory message on
page 10-5.)
(Copy operation in process)
Press Stop/Exit and wait until the
other operations in process finish
and then try again.
—OR—
Clear the data in the memory.
(See Out of Memory message on
page 10-5.)
—OR—
Add an optional memory.
(See Memory board on page 13-1.)
(Printing operation in process)
Reduce print resolution. (See Print
Quality in Software User's Guide on
the CD-ROM.)
—OR—
Clear the data in the memory.
See Out of Memory message on
page 10-5.)
—OR—
Add an optional memory.
(See Memory board on page 13-1.)
See Paper jams on page 12-6 and
Paper is jammed in the duplex tray
(For MFC-8840D) on page 12-10.