Transporting Your Scooter - Rascal R6 300 Owner's Manual

Transporting your Scooter

By Car — To transport your disassembled scooter by car, place each of the components into the trunk,
being careful not to scratch or mark any of the finished surfaces. Make sure the batteries are right side
up and on a level spot in your trunk. If you need assistance lifting weights, consider asking Electric
Mobility's Customer Service Department or your authorized service center about the Power Trunk Lift.
This device will assist you in transporting your scooter by transferring these components in and out of
your trunk with very little effort. (See "Specifications" for more information on weights).
By Airplane — To transport your unit on an airplane, we recommend that you call your airline at least
24 hours in advance to ensure that they are aware of your scooter. Your Rascal batteries are approved
for airline travel. Ask specifically where and with whom you should drop the unit off and where and with
whom you should retrieve it at your destination.
Remember to bring this manual with you as a reference on your trip. Your manual will assist you in
disassembling and re-assembling your unit if required.
Prior to leaving the airport, remember to test the unit out when first getting on it. Direct any questions
to the airline personnel if the unit does not work as it did prior to transportation.
If traveling outside of the United States, you may require a different charger or an adapter for your
present charger. Customer Service or your authorized service center can help you answer these
questions and supply you with the charger or adapter you require.
This scooter does not meet Federal Safety Standards for motor vehicle
seating. Do not sit, nor permit anyone else to sit, in the seat of your
scooter during transportation in a motor vehicle as this poses a
significant risk of bodily injury or even death.
Rascal R6 300 Scooter Owner's Manual
WARNING!
EMC Part: 19277200 • Rev. 06 • 09/04/2007
22