Sensor Wash; Autoopen; Optimise Standby - Miele G 6370 Operating Instructions Manual

Sensor wash

You can adjust the Sensor wash pro‐
gramme so that it will remove stubborn
soling in a lightly soiled load.
 Select the setting you want and con‐
firm with OK.

AutoOpen

At the end of programmes with a drying
phase (except
Extra quiet
open automatically a little in order to
help the drying process (see "Pro‐
gramme chart").
In the ECO programme the door will
open during the drying phase.
This function can be deactivated if
wished.
 Select the setting you want and con‐
firm with OK.

If you have deactivated the auto‐
matic door opening function but
would still like to open the door at
the end of the programme, then
make sure that you open the door
fully. Otherwise steam from the dish‐
washer could damage the edge of
the worktop because the fan is no
longer running.
) the door will

Optimise standby

The dishwasher is supplied with the
function set as standard.
timise standby
To save energy the dishwasher will
switch off automatically a few minutes
after the last time a button has been
pressed or after the end of a pro‐
gramme.
The dishwasher will not switch off in
the event of a fault.
Optimise standby can be switched off if
you prefer. If you do this the duration
before the dishwasher switches off in‐
creases to 6 hours. Doing this will in‐
crease energy consumption.
 Select the setting you want and con‐
firm with OK.
Settings menu
Op-
89