Problem Solving Guide; Technical Problems - Miele G 6370 Operating Instructions Manual

Problem solving guide

Most minor faults in the performance of the appliance, some of which may result
from incorrect operation, can be put right without contacting the Service Depart‐
ment.
The following guide may help you to find the reason for a fault, and to correct it.
You should, however, note the following:

Unauthorised or incorrect repairs could cause personal injury or damage to
the appliance.
Repair work to electrical appliances should only be carried out by a suitably
qualified and trained person in strict accordance with current local and national
safety regulations. The manufacturer cannot be held liable for unauthorised
work.

Technical problems

Problem
The dishwasher will not
start.
The dishwasher stops
during a programme.
After the programme
has started, the In-op‐
eration indicator light is
not visible.
64
Cause and remedy
The door is not properly closed.
 Push the door firmly shut.
The appliance is not plugged in.
 Insert the plug and switch on at the socket.
The mains fuse has tripped.
 Reset the trip switch in the mains fuse box or re‐
place the fuse in the plug (minimum fuse rating -
see data plate).
The dishwasher is not switched on.
 Switch the dishwasher on with the  button.
The mains fuse has tripped.
 Reset the trip switch in the mains fuse box or re‐
place the fuse in the plug (minimum fuse rating -
see data plate).
 If the mains fuse trips again, call the Miele Service
Department.
The reflector panel was not correctly fitted.
 Re-fit the reflector panel correctly (see Installation
diagram).