Adjust Sensor Wash - Miele G 6260 Operating Instructions Manual

Adjust Sensor wash

You can adjust the Sensor wash pro‐
gramme so that it will remove stubborn
soiling in a lightly soiled load.
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the programme selector button
 in, and whilst holding it in switch
the dishwasher on using the  but‐
ton.
Keep the programme selector button
 pressed in for at least four sec‐
onds until the lower right hand pro‐
gramme indicator comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Programme options
 Press the  button 5 times.
The  indicator will flash rapidly 5
times at intervals.
The flashing sequence in the display in‐
dicates whether Adjust sensor wash is
activated or not.
–  : "Adjust sensor wash" activated
–  : "Adjust sensor wash" deactiva‐
ted
 Press the programme selector button
 to change the setting.
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.
53