Adjust Sensor Wash - Miele G 4960 Operating Instructions Manual

Adjust Sensor wash

You can adjust the Sensor wash pro‐
gramme so that it will remove stubborn
soiling in a lightly soiled load.
 Open the door.
 Switch the dishwasher off with the 
button, if it is switched on.
 Press the programme selector button
 in and, whilst holding it in, switch
the dishwasher on using the  but‐
ton.
Keep the programme selector button
 pressed in for at least 4 seconds
until the lower right-hand programme
indicator comes on.
If this does not happen, start the proce‐
dure from the beginning again.
Programme options
 Press the  button five times.
The  indicator light will flash rapidly 5
times at intervals.
The flashing sequence in the display in‐
dicates whether "Adjust sensor wash"
is activated or not.
–  : "Adjust sensor wash" is switched
on.
–  : "Adjust sensor wash" is switch‐
ed off.
 Press the programme selector button
 if you wish to change the setting.
The setting is now stored in memory.
 Switch the dishwasher off with the 
button.
61