FALCOM NAVI-XS User Manual page 21

Navi-xs User's Guide
•
•
This confidential document is a property of FALCOM GmbH and may not be copied or circulated without previous permission.
The service appears below allows the users to establish a virtual serial port.
Right-click on the ... FALCOM NAVI-XS icon, on the appearing popup
menu click the Connect to Bluetooth™ Serial Port item. The LED blue light
constantly (means Bluetooth™ connection is created).
Enter the Passcode:
After the NAVI-XS has been discovered from the host device, to enable
data exchange, the user will be asked to enter the passcode. The
passcode is a fixed passcode assigned to the NAVI-XS by the
manufacturer. Enter "1111" when the system will prompt you to enter
the passcode. After the passcode is entered, the devices will validate
one another and complete the establishment of a trusted connection.
For more details about Bluetooth™, please refer to the software manual
that you are currently using.
The aforementioned icon will change its colour from grey to green as
shows in the figure below. The service, which the NAVI-XS offers, is also
shown below.
Version 1.01
Page 20