Global Error Indicator - Fujitsu PRIMERGY BX924 S3 Operating Manual

Global Error indicator (orange)
– Lights up orange if a prefailure event has been detected that
requires (precautionary) service intervention.
– Flashes orange if an error was detected that requires service
intervention.
– Does not light up if there is no critical event.
If the event is still acute after a power failure, the indicator is
activated after the restart.
The indicator also lights up in standby mode.
You can find more details on the indicated errors in the System
Event Log (SEL), in the Management Blade Web interface, on
the ServerView Local Service Panel, on the ServerView Local
Service Display, in the ServerView Operations Manager or via the
iRMC S2/S3's Web interface.
CSS CSS indicator (yellow)
– Lights up yellow if a prefailure event was detected for a CSS
component that you can fix yourself (for reasons of
precaution) with the CSS concept.
– Flashes yellow if an error was detected that you can fix
yourself with the CSS concept.
– Does not light up when the system is OK.
If the event is still acute after a power cycle, the indicator is
activated after the restart.
The indicator also lights up in standby mode.
For more information on the CSS concept, see
Service (CSS)" on page
ID ID indicator (blue)
Lights up blue when the system has been selected by pressing the
ID button. To deactivate, press the button again.
The ID indicator can also be activated via the ServerView
Operations Manager, the Management Blade web interface and the
iRMC S3 web interface. Its status is reported to the ServerView
Operations Manager and the iRMC S3.
BX924 S3
13.
Operating Manual
Starting up and operation
"Customer Self
49