Fujitsu PRIMERGY BX924 S3 Operating Manual page 16

Functional overview
– 10 Gbit/s CNA mezzanine card with 2 ports
– 40-Gbit/s Infiniband mezzanine card with 2 ports
– 56-Gbit/s Infiniband mezzanine card with 2 ports
I
If a server blade is configured with one or two mezzanine cards, this does
not exclude other configurations for any of the other server blades in a
system unit.
If you want to install mezzanine cards in server blades, the system unit
must be fitted with the corresponding Fibre Channel, SAS, Infiniband
and/or Ethernet connection blades. You can find detailed information
about the equipping rules for connection blades in the operating manual
for the system unit.
Mezzanine cards may only be installed and removed by authorized,
qualified personnel. The procedure is described in the PRIMERGY
BX924 S3 Server Blade Upgrade and Maintenance Manual.
USB Flash module (UFM)
A UFM (USB flash module) can also be configured.
Graphics controller
The server blade has an onboard graphics controller (integrated in the iRMC S3
controller). A monitor can be connected via the Y-cable on the front of the server
blade.
I
For peripherals like keyboard, mouse, display, optical drive, etc.
Advanced Video Redirection and Remote Storage connection by iRMC
S3 is recommended.
External ports
The server blade has the following ports on the front:
– One USB port
– One port for a special Y-cable , with 4 USB ports, one serial port and one
VGA port.
High level of availability and data security
When memory data is accessed, 1-bit errors are identified in the main memory
and automatically corrected with the error correcting code (ECC) method.
16 Operating Manual
BX924 S3