Fujitsu PRIMERGY BX924 S3 Operating Manual page 21

Onboard or integrated controllers
RAID Controller
SAS/SATA Controller
CNA Controller
Remote Management
Controller
Trusted Platform
Module (TPM)
Disk Drives
Drive configuration
BX924 S3
Modular RAID 5/6 controller with "MegaRAID
functionality" (SAS MegaRAID) for SAS1.0 and
SAS2.0. RAID levels 0, 1, 10, 1E, 5, 50, 6 and 60 are
supported for internal hard disk drive configurations.
A 6-port SAS/SATA controller is integrated on the
system board; up to two SAS or SATA drives can be
connected to the controller. The LSI Embedded
MegaRAID software (SATA Software RAID)
supports RAID levels 0, 1 and 10. The SAS
functionallity needs to be enabled separately by
using a ROM1 SCU Key.
The CNA controller is integrated on the system
board; up to 4 x 1 Gbit/s or 2x 10 Gbit/s can be
selected on the CNA controller.
Integrated Remote Management Controller
(iRMC S3, 32 MB attached memory incl. graphics
controller), IPMI 2.0 compatible
Infineon / 1.2 (option)
2x 2.5-inch SAS/SATA SSD
Operating Manual
Functional overview
21